- DSpace@FIRAT
- →
- MAKALE
- →
- TEKNOLOJİ FAKÜLTESİ
- →
- Gönderi tarihine göre TEKNOLOJİ FAKÜLTESİ listeleme
JavaScript is disabled for your browser. Some features of this site may not work without it.
Gönderi tarihi için TEKNOLOJİ FAKÜLTESİ listeleme
Toplam kayıt 76, listelenen: 1-20
-
(2011)Poroz üçgen kapalı bir ortamda akış ve ısı tranferi analizi nümerik olarak incelenmiştir. Üçgen kapalı ortamın merkezine cisim yerleştirilmiştir. Yerleştirilen cismin yükseklik ve en oranlarına göre akış ve ısı transferi ...
-
(2011)Bu bilimsel makalede, titanyum, kobalt ve molibden ile alaşımlandırılmış ve sinterlenmiş paslanmaz çeliklerin aşınma davranışları incelenmiştir.
-
(2010)Bölünmüş trapez kapalı ortamda akış ve ısı transferinin analizi yapılmıştır. Uniform olmayan sınır şartlarında sabit akım ve eş sıcaklık eğrileri elde edilmiştir. Gözenekli ortam şartlarında farklı Rayleigh sayılarında ...
-
(2012)Bitişik iki trapez ortamda akış ve ısı transfernin analizi sayısal olarak yapılmıştır. Geometrik oran, iletim oranı ve farklı Rayleigh sayılarında enerji analizi yapılmıştır.
-
(2005)Bu çalışmada, yapı alçıları ile Antalya Etibank Elektrometalurji İşletmesi Tesisleri’nde tutulan silis dumanlarının birlikte kullanılabilirliği araştırılmıştır. Yapı alçısı olarak kullanılan kartonpiyer alçısının SiFeCr ...
-
(2009)In this study, corrosion behavior of six different dual-phase (DP) steels with varying morphologies and martensite content has been examined in comparison to ferrite–pearlite steel in concrete. Intercritical annealing and ...
-
(2009)Dual-phase (DP) steels with different martensite contents were obtained by appropriate heat treatment of an SAE1010 structural carbon steel, which was cheap and widely used in the construction industry. The corrosion ...
-
(2015)In this study, natural convection heat transfer in a square cavity with an adiabatic fin mounted on a vertical wall was investigated numerically. Vertical boundaries were adiabatic and horizontal boundaries were isothermal ...
-
(2015)In this study, thermal mixing (TM) phenomena in a rectangle channel with adiabatic circle shaped body are investigated experimentally. Two parallel jets in different temperatures are located in the channel which has a ...
-
(2009)SAEIOIO structural carbon steel, which has a low cost price and wide range of use in the construction industry, has been studied as dual phase (DP) steel subjected to appropriate heat treatment, and its mechanical ...
-
(2010-01-01)In this study, the mechanical and physical properties of concrete specimens obtained by substituting cement with finely ground pumice (FGP) at proportions of 5%, 10%, 15% and 20% by weight has been investigated, in ...
-
(2010-01-01)This study investigated the effect of elevated temperature on the mechanical and physical properties of concrete specimens obtained by substituting cement with finely ground pumice (FGP) at proportions of 5%, 10%, 15% ...
-
(2010-01-01)The mechanical and physical properties of concrete specimens obtained from replacing natural coarse aggregate with waste vehicle rubber tires at levels of 2vol%, 5vol%, 7vol%, and 10vol% were studied, and the corrosion ...
-
(2014-01-01)This paper investigated the effects of marble dust and glass fiber on mechanical and physical properties of cement mortars exposed to high temperature as experimentally and statistically. For this purpose, the mixes ...
-
(2014-01-01)This paper investigated the usability of marble dust and glass fiber against the harmful effects of freeze–thaw (FT) cycles on cement mortars as experimentally and statistically. To this end, the cement mortar specimens ...
-
(2015-01-01)In this study, the mechanical and physical properties of structural lightweight concrete (SLC) specimens produced by substituting cement with metakaolin (MK) at ratios of 5%, 10%, 15% and 20% w/w were examined, and the ...
-
(2007-12-24)Bu çalışmada, toplam karışıma ağırlıkça %0.2, 0.4 ve 0.6 oranlarında cam lifler katılarak elde edilen beton boruların tepe yükü dayanımlarındaki değişim araştırılmıştır. Beton borular TS 821 EN 1916’ya göre test edilmiştir. ...
-
(2008-03-21)The scanning electron microscope(SEM) is one of the most important instruments available for the examination and analysis of microstructural charecteristics of materials. The primary reason for the SEM's advantage is the ...
-
Improvement of Mechanical Properties of Reinforcing Steel Used in the Reinforced Concrete Structures (2009-01-01)SAEIOIO structural carbon steel, which has a low cost price and wide range of use in the construction industry, has been studied as dual phase (DP) steel subjected to appropriate heat treatment, and its mechanical ...
-
(2008-02-01)In this study, corrosion behavior of six different dual-phase (DP) steels with varying morphologies and martensite content has been examined in comparison to ferrite–pearlite steel in concrete. Intercritical annealing and ...
Toplam kayıt 76, listelenen: 1-20
Diğer Bağlantılar
RSS Beslemeleri
Adres
Fırat Üniversitesi Rektörlüğü
23119
Elazığ-Merkez
TÜRKİYE
